| Screed Fix™ for in-screed heating cables |
|
Screed Fix™ fixing strip for in-screed heating cables. Zinc plated steel strip with fixing tabs at 3.5 cm pitches. Supplied in 1 x 10 m rolls. Easily cut to length.
Use 1/2 wide Vysa-Bond™ Mi-T extra strong self adhesive tape to bond Screed Fix™ to the concrete floor surface. Alternatively, use Vysa-Bond™ SAT self adhesive 'Gaffer' tape or Vysa-Bond™ LTM4 rapid setting PU adhesive if preferred. Historically, Screed Fix™ fixing strip has been fixed using nails but this practice is now frowned upon as services are increasingly buried in the concrete floor. |
Screed Fix™ fixing strip is generally installed as shown and the heating cable secured under the fixing tabs to hold it securely in position when the floor screed is poured. The fixing centres that can be achieved at 3.5 cm pitch are: 3.5 cm, 7 cm, 10.5 cm, 14 cm, 17.5 cm etc.
However, you should not use 3.5 cm and 7 cm pitches as the heating effect will be too great. the table below shows what heating effect will be achieved for 20W/m cables at the pitch shown. |
|
|
|
|
|
| Code | Size | | | 2548 | 1 x 10m roll | |
|
|
|
|
