Polybond Epoxy DPM is a two-part water based epoxy specially formulated to act as a Damp-Proof Membrane on porous cementitious sub-floors.

Once cured the tough film is completely waterproof and is unaffected by adhesives, bonding agents, levelling compounds and screeds.

After mixing, Epoxy DPM has a pot life of 1 hour at 10 ^oC, 45 minutes at 20 ^oC and less at higher temperatures.

It should be applied with a brush or roller at the rate of 8 square metres per litre.

Allow at least 6 hours to dry or when the first coat has dried sufficiently to walk on, then apply a second coat at 90 ^o to the first coat.

Supplied in 1 Litre containers sufficient for approximately 7 to 10 square metres depending on the substrate.